Welcome at PEES COMPONENTS.
PEES COMPONENTS is the Distributor of products from the formerCompany PEES Steuer- und Regelanlagen GmbH, Moers.
PEES COMPONENTS vertreibt Produkte der ehemaligen
Firma PEES Steuer- und Regelanlagen GmbH aus Moers.
NEW PRODUCTS:
PEES COMPONENTS DIGITAL MODULE
In line with the technological trend, a series of digital devices installed in 24/48-pole Phoenix module housings for rail-mounting has been developed to augment the familiar series of analog devices, such as the AN2XX and AN4XX. … more
ADN410 Digital Module
The ADN 410 has been developed as a CNC control system for operation with a servo-valve. The assembly consists of two modules, of types MD3 and MD14. The MD3 is the basic module (equivalent to the ADN 404). The MD14 is the add-on CNC module. The MD14 CNC module is also used in other device combinations, due to the modular structure of this system. The ADN 404 basic module has, in this particular case, already been described, with the result that this outline description relates primarily to the add-on module.
AN418 Servo Amplifier
The AN418 servo amplifier module is intended for the control of proportional valves with two magnets. The snap-on housing enables the AN418 module to be mounted on normal carrier rails in control cabinets. The electrical connections are via a terminal strip and a flat connector (enable input).
AN223 Measurement Socket Module
The AN 223 measurement socket module has 20 measurement sockets on the front plate. These allow rapid checking of the individual function stages of a system. In addition, 9 pairs of solder tags are provided for use as required.
You are here: Startpage
