Mains Adapter/Distribution Module
ADN408
The ADN 408 distribution unit has been specially developed for plant and system engineering, in order to eliminate the need to connect multiple cores to a single screw terminal. The module has the following outputs: 4 x 24V for supply of adjacent modules, and 4 x +/–15V or +/–10V.
The +/–15V and +/–10V voltages are provided for supply of external sensors. They can be jumper-selected, and can each be loaded to +/–50mA.
Downloads:
You are here: Startpage ›› Digital Module
PEES COMPONENTS
DIGITAL MODULE
In line with the technological trend, a series of digital devices installed in 24/48-pole Phoenix module housings for rail-mounting has been developed to augment the familiar series of analog devices, such as the AN2XX and AN4XX.
The basic modules take the form of three-loop P, I, DT1 controllers which, depending on type, are suitable, with the additional end stages, for servo-valves up to +/-200mA and proportional valves up to 3000mA, or for applications in which the end stage is mounted on the valve.
Click on a link below to get detail information. Also available as PDF-document, you will need the Adobe-Reader to view these documents.
